1.When conducting experiments at the station, it is necessary to proactively verify the sample list with the on duty staff. If there are any elements that are inconsistent with the Safety Audit Form, the beamline station has the right not to arrange any measurement on those;

2. Regarding the use of the RED "emergency stop button": in case someone is locked inside the optical hutch, both the person inside the hutch and those outside the hutch who are informed should press the button to protect personal safety; In other cases, use of that button is strictly prohibited;

3. It is strictly prohibited to privately pull electrical wires, privately connect air hoses, and other operations that may affect the overall safety of the hall;

4. Wear user badges and dosimeters throughout the experiment, otherwise the experiment is prohibited;

5. During the experiment, strictly follow various experimental operating rules and obey the arrangements of the station duty personnel; operate various instruments and equipment according to the manuals or instructions. If damage occurs due to violation of normal operation, the applicant for the project shall bear corresponding responsibilities;

6. Before the experiment begins, all experimental personnel must participate in the station usage training organized by the station duty staff. If they are unable to attend the training due to being late, the person in charge of the project will be responsible for the training;

7. Ensure that at least one experiment operator is on site during the entire beamtime;

8. Only covered containers are allowed to be used in the experimental area for drinking water, and eating in the experimental area is strictly prohibited;

9. During the carrying-out of the beamtime, other individuals who are not included in the list of the experimental Safety Audit Form are not allowed to use the station;

10. Ensure that the experiment ends within the allocated time to assure the normal experiment of subsequent users;

After the experiment is completed, ensure that the samples outside the vacuum chamber are taken away and the station is cleaned and tidy, and ensure that the waste is cleaned out of the station in a timely manner.