| Station | Equipment | Specifications |
| LVP1 | 200-ton DDIA press | LPO 200-300/70，DDIA module，max load 200 ton 1st stage anvil 3mm/6mm, or 27mm (1st stage compression with 32mm cubic pyrophyllite, 2nd stage anvil 14mm for 6-8 cell) 3KW heating system，temperature up to 2000 K |
| HP-Ge SSD | Canberra GL0110, energy resolution：160 eV@5.9 keV; 500 eV@122keV | |
| ENG1 | Multi-dimensional sample stage | Huber stage Botton 5-axis stage: (Load ≤200kg) X1 axis (horizontal ┴ beam)：-1000~+200mm Z1 axis (vertical ┴ beam)：0-100 mm Phi axis (rotate around Z): 360° X-tilt axis：±5° Y-tilt axis：±5° Top air-bearing rotation stage: (Load ≤50kg) X2 axis（horizontal ┴ beam）：±25mm Y2 axis（horizontal ║ beam）：±25mm Z2 axis（vertical ┴ beam）：0-100mm axis（rotate around Z）：360° |
| PILATUS3 X CdTe 2M | High quantum efficiency, up to 100 keV, noise-free single-photon counting, image area 253.7mm×288.8mm, pixel size 172μm, pixel array 1475 × 1679，single photon detector，max 250fps，0.95ms readout，20bit image | |
| Multi-lens optical and image system | Optical magnification: 0.29~1.8X, 2X and 7.5X a)High resolution camera: Pco.edge 5.5: pixel size 6.5μm, pixel array 2560×2160 b)High-speed camera: FASTCAM Mini UX100, pixel size 10μm, pixel array 1280×1024, max 204800fps | |
| LVP2 | 2000-ton dual module press | LPO 2000-710/80，DDIA/Kawai modules, max load 2000 ton Kawai module：1st stage 47mm，6-8 cell /2nd stage anvil 25.4mm DDIA module：1st stage 49mm，6-8 cell/2nd stage anvil 25.4mm; 1st stage 27mm, 6-8 cell/2nd stage anvil 14mm, 6-6 cell/2nd stage anvil 12mm 6KW heating system，temperature up to 2100 K |
| HP-Ge SSD | Canberra GL0110, energy resolution：160 eV@5.9 keV; 500 eV@122keV | |
| SX165 CCD detector | Image area diameter 165mm, pixel size 80μm, pixel array 2048×2048, 16bit image | |
| ENG2 | Coordinate table for positioning heavy pieces | Max load 2000kg, top area diameter 1m, axis range and resolution: X axis（horizontal ┴ beam）：±500mm (10μm) Y axis（horizontal ║ beam）：±50mm (10μm) Z axis（vertical ┴ beam）：±500mm (10μm) Rx axis（rotate around X）：±2°（0.02°） Phi axis（rotate around Z）：360°（0.005°） |
| 23-element HP-Ge SSD | Energy resolution: shaping time 3μs: <170eV@5.9keV, <520eV@122keV shaping time 0.2μs: <400eV@5.9keV, <700eV@122keV | |
| 17-inch image plate | Mercu 1717V, image area 43cm×43cm, pixel size 139μm, pixel array 3072×3072, 10fps, 16bit image, light and portable | |
| Tensile Testing Machine | KAPPA Mini 5kN, max load 5kN | |
| Fatigue Testing Machine | Steplab UD040, max dynamic 35kN, static 25kN, sample temperature up to 1300℃ by electromagnetic heater | |
| Other | heating stage | Linkam TS1500, max temperature 1500 K |
